相关文章

超声波清洗机生产厂家讲解铝盖清洗机的操作流程

铝盖由进料口加入清洗桶内,进料与进水可同时进行,当水位达到规定高度时,水位传感器动作,自动停止进水。进水进料结束后进行清洗。铝盖清洗机在转动滚筒的同时,打开副进水使漂浮于水面的污物从溢出口排出,同时进行清洗,清洗时间可由触摸屏预置。清洗时间到以上各部位复位打开排污电磁阀,把水排掉,然后关上排污电磁阀,重新进水进行精洗,精洗过程中超声波自动开启,水循环喷淋,滚筒转动,付进水开。精洗结束后,打开排污电磁阀,再次排液。清洗后,进行烘干、灭菌。合格后按一下出料按钮进行出料。

Aluminum cover is composed of a feed inlet into the cleaning barrel, feed and water intake can be carried out at the same time, when the water level reaches the required height, water level sensor, automatic stop water inlet. The inlet feed after cleaning. Aluminum cover cleaning machine in the rotating drum at the same time, open the side inlet to floating on the water discharged from the overflow outlet and dirt, cleaning, cleaning time can be preset by the touch screen. Reduction cleaning time to each site open drainage electromagnetic valve, drained water, and then shut the drainage electromagnetic valve, re water for washing, automatic opening ultrasonic wash process, water spray, roller to rotate, pay the water. Wash finished, open the drain valve, liquid again. After cleaning, drying, sterilization. After passing the click button to a material discharging.

铝盖清洗机的结构是由主变速电机、主传动轴、清洗桶、清洗槽、水泵、水过滤器,大功率超声波清洗机,以及电控部分等部件组成,结构合理,操作方便。

The structure of aluminum cover cleaning machine is composed of a main driving gear motor, shaft, a cleaning barrel, cleaning tank, pump, water filter, high power ultrasonic cleaning machine, and an electric control part, reasonable structure, convenient operation.

1、主传动控制器是采用进口变频调速器,体积小,调速范围大,操作方便

1, the main drive controller is imported frequency converter, small volume, wide range of speed regulation, convenient operation

2、清洗桶是簿壁圆型桶体,圆周布满筛孔,内有搅拌挡板,后端与传动主轴联接。

2, cleaning bucket is a thin wall circular barrel body, the circumference with sieving holes, a mixing baffle, rear end and the drive spindle.

3、清洗槽是方形全密封式不锈钢结构,侧壁有溢流槽,下有排污管,外接循环泵和过滤器。

3, the cleaning tank is square sealed stainless steel structure, side wall has the overflow tank, a sewage pipe, external circulation pump and the filter.

4、管路系统是装在主机的后部,装有不同规格的电磁阀,整个进、排水全是由电磁阀自动控制,循环水经过精密过滤器(0.22υ)过滤后喷入清洗槽内,保证水质的洁净度。

4, pipeline system is installed in the rear engine, electromagnetic valve with different specifications, the whole into, drainage is automatically controlled by a solenoid valve, circulating water through the precision filter (0.22 V) filter is sprayed into the cleaning tank, ensure the cleanliness of water quality.

5、铝盖清洗机上部装有新风、环风、排风风阀。可根据需要控制风量,中部装有风机、电加热器,形成整个热风循环进行烘干灭菌,升温降温系统。整个程序按进料——进水——粗洗——排水——精洗­­——排水——烘干——灭菌——出料依次完成。出料完毕,按“停止”结束整个过程。

5, aluminum cover cleaning machine is arranged on the upper part of the fresh air, wind, air exhaust air valve ring. According to the need to control the volume, arranged in the middle of a fan, electric heater, hot air circulation drying to form the entire sterilization, heating and cooling system. The whole program according to feed -- -- -- -- rough wash water drainage wash ­ ­ -- -- -- -- water drying sterilization discharge sequentially complete. The discharge is completed, press the "stop" the end of the whole process.

超声波清洗机生产厂家